HONDA CRF250LA ABS

HONDA CRF250LA ABS

Description

Wearing sharp new CRF450R-derived bodywork, the dual-purpose ready-for-anything CRF250LA has more power and torque from a revised intake and exhaust system, ABS and a new digital dash with tachometer and fuel gauge.

OVERVIEW

For 2017 the CRF250LA has been revised with styling cues taken directly from Honda’s CRF250R and CRF450R MX machines, the new CRF250L is ready for anything a rider can throw at it: it’s tough, practical and equally at home around a city block or out on the trail.

Well proven, the CRF250LAs tough steel frame and long travel Showa suspension remain unchanged, but new bodywork draws its influence from the minimalism for the CRF450R MX for a sharper, slimmed-down look. A digital dash adds a tachometer and fuel gauge and ABS, with the option of disengaging it for the rear brake.

The 249cc engine boasts more bottom-end torque and peak power from revised PGM-FI and throttle body plus a new airbox, connector tube and lightweight exhaust.

CHASSIS/SUSPENSION

The CRF250LAs frame is constructed from steel, with twin oval-section main spars and a semi-double cradle. A wheelbase of 1,445mm is matched to a 27.6°’ rake with 113mm trail and ground clearance of 255mm. Seat height is 875mm with wet weight of 146kg.

A 43mm Showa inverted fork has 250mm of stroke: light weight and rigid, one side houses the spring while the other provides damping control. A 17mm front wheel spindle (2mm larger in diameter) improves rigidity and handling feel. Pro-Link rear suspension features a 240mm axle stroke; the Showa shock absorber is a single tube design with 40mm diameter cylinder.

Up front, a 256mm floating wave-style disc is worked by a two-piston caliper. Two channel ABS gives the rider the option to switch it off for the rear caliper. Aluminium rims (21-inch front/18 rear) wear block pattern tyres (front: 3.00-21 51P, rear: 120/80-18M/C 62P). A small detail – but a useful one off-road – is that the gear lever now features a folding tip.

ENGINE

The CRF250LAs 249cc liquid-cooled single-cylinder DOHC engine has more bottom-end torque and high rpm power, with a linear delivery. Peak power of 18.2kW is delivered @ 8,500rpm with peak torque of 22.6Nm arriving @ 6,750rpm.

Revised PGM-FI feeds fuel/air mixture through a 38mm throttle body (up from 36mm) and draws air from the airbox via a direct connecting tube. The exhaust muffler has a diameter of 115mm, houses the catalyser and uses two chambers: it’s 450g lighter than the previous design and a larger bore downpipe helps the engine breathe and make more power.

The engine uses a compact roller/rocker arm valve train and cylinder head, with bore and stroke of 76 x 55mm. An offset cylinder reduces frictional losses while the piston itself incorporates a special surface material, plus a molybdenum coating. The oil pump features an internal relief structure that prevents aeration of relieved oil.

LAMS APPROVED

Please consult your local authority before purchasing a motorcycle for learner use. Each state and territory has its own regulations relating to the range of motorcycle models approved under the Learner Approved Motorcycle Scheme. Honda does not warrant or represent that the models shown are approved in each state and territory.

NOTE

Overseas Model Shown

ENGINE

  • ENGINE TYPE
    249.6cc Liquid-cooled, 4-stroke, single cylinder
  • BORE AND STROKE
    76mm x 55mm
  • COMPRESSION RATIO
    10.7:1
  • VALVE TRAIN
    DOHC 4-valve
  • CARBURATION
    PGM-FI 38mm throttle body
  • IGNITION
    Full transistorized ignition
  • TRANSMISSION
    6-speed
  • STARTER
    Electric
  • FINAL DRIVE
    Chain

SUSPENSION

  • FRONT
    43mm telescopic inverted fork; 250mm travel
  • REAR
    Pro-Link single shock; 938mm travel

BRAKES

  • FRONT
    Single 256mm disc with twin piston caliper; ABS.
  • REAR
    Single 220mm disc; ABS.

TYRES

  • FRONT
    3.00-21 inch
  • REAR
    120/80 - 18 inch

FRAME

  • DIMENSIONS (LxWxH)
    2,195mm x 819mm x 1,195mm
  • WHEELBASE
    1,445mm
  • SEAT HEIGHT
    875mm
  • GROUND CLEARANCE
    255mm
  • FUEL CAPICITY
    7.9 litres
  • KERB WEIGHT
    146kg

WARRANTY

  • WARRANTY PERIOD
    24 months

 

Reference Number/VIN:
CRF250LA ABS
Drive Away:
No
Make:
Honda
Model:
CRF250LA ABS
Type:
Trail
Condition:
New
Year:
2019

Enquiry

Website By: element7digital.com.au